Pixel Box V1
Summary
Pixel Box is a short - 10-15 minute - community engagement workshop. It has an art focus, basic electronics and a number of possible extension activities. These activities will be listed later in this document as they are developed.
Materials
These materials are per participant if not specified otherwise.
- 1 x CR2032 Battery
- 2 x LED (random colours)
- Laser Cut Housing (see below)
- Tracing Paper (70x70mm square)
- Quick Grip Adhesive or Hot Glue Gun
Tools
None
Instructions
Rename the steps as you like, use italics or bold for emphasis
Step Zero:
Prep all material prior to workshop. Ensure sufficient materials for the number of participants.
Step One:
Assemble outer box.
Step Two:
Assemble inner box.
Step Three:
Assemble LED and battery assembly
Step Four:
Insert LED and Battery assembly into inner box
Step Five:
Wrap tracing paper over open face of inner box
Step Six:
Slide inner box into outer box, open face of inner box toward opening in outer box.
Activity Extensions
To be added
Files
This is the most recent file laid out. pixel_box_004_final.cdr
