X-Carve

X-Carve

Originally a Shapoko 2 with X-Carve upgrade kit, the final machine has a guaranteed usable area of 700x700x50mm

It can take 1/8“, 1/4” or 6mm bits and has a spindle speed between fast and way too fast.

Software is Vetric VCarve Pro for toolpath generation and Candle for machine operation.

Technical

Mechanical, Electrical and Software summery and detail for machine repair and upgrades.

Operations

Documentation for both staff and final users

facilities/hte/projects/x-carve.txt · Last modified: 2019/02/19 15:21 by Andrei Maberley
CC Attribution-Share Alike 4.0 International Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International

We acknowledge Aboriginal and Torres Strait Islander peoples and their continuing connection to land and as custodians of stories for millennia. We are inspired by this tradition in our work to share and preserve Queensland's memory for future generations.

© The State of Queensland (State Library of Queensland)