Standard Operating Procedures

Standard Operating Procedures

These are one page safety reminders made to be laminated and posted adjacent to the tool for ready reference. All SOP are always available from the Fabrication Lab supervisor on request.

EquipmentSOP
Disc and Belt Sanderedge_sop-sander-disc_belt_controlled.docx
Orbital Sanderedge_sop-sander-orbital_controlled.docx
Reciprocating Sawedge_sop-saw_reciprocating_controlled.docx
Sewing Machine/Overlockeredge_sop-sewing_machine-overlocker_controlled.docx
Soldering Ironedge_sop-soldering_iron_controlled.docx
Spray Boothedge_sop-spray_booth_controlled.docx
Bulk Item Storageedge_sop-storing_bulk_items_controlled.docx
Strip Heateredge_sop-strip_heater_controlled.docx
Vacuum Chamberedge_sop-vacuum_chamber_controlled.docx
Vacuum Formeredge_sop-vacuum_former_controlled.docx
X-Carve Routeredge_sop-x-carve_controlled.docx
Impact Hammer Drilledge_sop-drill-impact_hammer_controlled.docx
Impact Drilledge_sop-drill_impact_controlled.docx
Drill Pressedge_sop-drill_press_controlled.docx
Hand Toolsedge_sop-hand_tools_controlled.docx
Heat Gunedge_sop-heat_gun_controlled.docx
Hot Glue Gunedge_sop-hot_glue_gun_controlled.docx
Jig Sawedge_sop-jig_saw_controlled.docx
Laddersedge_sop-ladders_controlled.docx
Laser Cutteredge_sop-laser_cutter_engraver_controlled.docx
Manual Handlingedge_sop-manual_handling_controlled.docx
Metal Drop Sawedge_sop-metal_drop_saw_controlled.docx
MIG Welderedge_sop-mig_welder_controlled.docx
Mitre Sawedge_sop-mitre_saw_controlled.docx
Pallet Jackedge_sop-pallet_jack_controlled.docx
Plastic Inject Moulderedge_sop-plastic_injection_moulder_controlled.docx
Plastic Shredderedge_sop-plastic_shredder_controlled.docx
Pressure Chamberedge_sop-pressure_chamber_controlled.docx
Rotary Toolsedge_sop-rotary_tools_controlled.docx
Plunge Routeredge_sop-router-plunge_controlled.docx
Trim Routeredge_sop-router-trimmer_controlled.docx
Table Routeredge_sop-router_table_controlled.docx
Sander Grinder/Linisheredge_sop-sander_grinder-linisher_controlled.docx
3D Printeredge_sop-3d_printer_controlled.docx
Air Compressoredge_sop-air_compressor_controlled.docx
Cordless Drilledge_sop-drill_cordless_controlled.docx
Nail Gunedge_sop-nail_gun_controlled.docx

SOP Template

facilities/fablab/ohs/sop/start.txt · Last modified: 2021/02/24 17:21 by Andrei Maberley
CC Attribution-Share Alike 4.0 International Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International

We acknowledge Aboriginal and Torres Strait Islander peoples and their continuing connection to land and as custodians of stories for millennia. We are inspired by this tradition in our work to share and preserve Queensland's memory for future generations.