OHS

Standard Operating Procedures

SOPs for power tools and other equipment which introduce increased levels of risk in their operation have been developed.

Users are required to confirm that they have read these after completing an induction (which may take Recognition of Prior Learning into account) on each item of equipment, and copies are displayed adjacent to where the equipment is stored or installed.

Printable versions of these SOPs are here:

the_edge_sop_hammer_drill

the_edge_sop_hammer_drill.docx

the_edge_sop_angle_grinder_v2

the_edge_sop_angle_grinder_v2.docx

the_edge_sop_belt_disc_sander_v2.docx

the_edge_sop_circular_saw.docx

the_edge_sop_cnc_router.docx

the_edge_sop_compound_mitre_saw_v2.docx

the_edge_sop_drill_press.docx

the_edge_sop_hand_router.docx

the_edge_sop_jig_saw_v2.docx

the_edge_sop_metal_drop_saw_v2.docx

the_edge_sop_mig_welder_v2.docx

facilities/fablab/equipment-cots/ohs.txt · Last modified: 2020/09/01 10:26 by Andrei Maberley
CC Attribution-Share Alike 4.0 International Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International

We acknowledge Aboriginal and Torres Strait Islander peoples and their continuing connection to land and as custodians of stories for millennia. We are inspired by this tradition in our work to share and preserve Queensland's memory for future generations.