Table of Contents


State Library provides a range of off the shelf material/consumables for puchase in the Fabrication Lab.

Material Prices

3D Printer Plastic (PLA)NABlackNAfree within reason then 15c/gram
Acrylic6mmClear~A2$ 28.00/ sheet
6mmClear~A3$ 15.00 / sheet
3mmClear~A2$ 17.00/ sheet
3mmClear~A3$ 7.5 / sheet
3mmWhite~A2$ 17.00 / sheet
3mmWhite~A3$ 8.00/ sheet
3mmBlack~A2$ 17.00 / sheet
3mmBlack~A3$ 8.00 / sheet
3mmColour~A3$ 9.00/ sheet
1.5mmClear~A3$ 8.00 / sheet
Polypropylene0.6mmVarious~A2$ 4.00/ sheet
0.6mmVarious~A3$ 2.50/ sheet
Plywood (Melamine Glue for Laser)6.9mm~A2$ 14.00/ sheet
~A3$ 7.00/ sheet
4.5mm~A2$ 10.00/ sheet
~A3$ 5.00 / sheet
Plywood (non structural CD for CNC)15mmPine1200x1200$ 28.00 / Sheet
15mmPine2400x1200$ 50.00 / Sheet
Single ply 2.5mmWhite top~A3$ 2.00 / sheet
Single Ply 3.5mmNatural~A2$ 2.00 / sheet
Double Ply 6mmNatural~A2$ 4.00 / sheet
Craft Card (Dense)3mm 1800gsm~A2$ 8.00 / sheet
Timber Veneer0.5 mmVarious~A2$15.00 / sheet
Expanded PVC10mm~A2$16.00 / sheet
Extruded Styrene Foam 30mm~A3$ 10.00 / sheet
30mm~A2$16.00/ sheet


facilities/fablab/materials/start.txt · Last modified: 2021/06/10 19:12 by Billie Ruben
CC Attribution-Share Alike 4.0 International Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International

We acknowledge Aboriginal and Torres Strait Islander peoples and their continuing connection to land and as custodians of stories for millennia. We are inspired by this tradition in our work to share and preserve Queensland's memory for future generations.