Sheet Stock Storage

Off-cut and odd size sheet storage for the Fabrication Lab Machine Shop, cut on the Mutlicam CNC with 15mm plywood. Two versions have been output, V1 has no back for deeper sheets.

V2 has no centre shelf for taller sheets.

Design and Cut Files

Fusion 360 Model

The fusion360 model can be viewed and download from here. Use this file if you want to change dimensions or stock, etc..

DXF Files

Use these files to cut on a CNC.

DXF files for V1

DXF files for V2 - with no shelf.

V Carve

Use these files to cut on State library's CNC at The Edge.

Cut and Assembly

The material is 15mm plywood, cut with a 6.25 (1/4 inch) bit.

facilities/fablab/fittings-custom/stock_storage.txt · Last modified: 2019/05/07 13:53 by amaberley
CC Attribution-Share Alike 4.0 International Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International

We acknowledge Aboriginal and Torres Strait Islander peoples and their continuing connection to land and as custodians of stories for millennia. We are inspired by this tradition in our work to share and preserve Queensland's memory for future generations.