Full List of A2MC Tabs and Functions
FUNCTION | NOTES |
---|---|
Function 01 - Machine Properties | |
Function 02 - Verify Job | |
Function 03 - Machine Limits Control (Co-ordinate display) | |
Function 05 - Execute M-Code | |
Function 06 - Execute G-Code | |
Function 07 - Enable/Disable Machine's Motors | |
Function 09 - Abort Job | |
Function 10 - Set User XY Origin“ |
Full List of A2MC Tabs and Functions Continued
FUNCTION | NOTES |
---|---|
Function 11 - Choose Current Origin | |
Function 12 - Seek Machine Origin | |
Function 13 - Go to Current Origin | |
Function 16 - Set Parking Position | |
Function 20 - Set Material Thickness | |
Function 24 - Set Tool Height of tangential knife heads | |
Function 25 - Set Tool Height ” | |
Function 26 - Set ATC Tool Heights | ATC not fitted |
Function 27 - Set User Z Origin | |
Function 28 - Set and Plane Waste Board“ | |
Function 30 - Edit Tools | |
Function 31 - Change Active Tool | |
Function 34 - Unload Spindles | ATC not fitted |
Function 35 - Set dual carriage spacing | ATC not fitted |
Full List of A2MC Tabs and Functions Continued 2
FUNCTION | NOTES |
---|---|
Function 40 - Current Job Properties | |
Function 41 - Feed Speed | |
Function 42 - Spindle Control | |
Function 43 - Job Repeat ” | |
Function 44 - Job Array “ | |
Function 45 - Plunge Speed | |
Function 46 - Measured Move | |
Function 47 - Cut Rectangle” | |
Function 50 Vacuum Pump, Dust Collector and Mist Control | Not Fitted |
Function 51 - Digitise 2D & 3D Jobs.“ | |
Function 54 - Safety Interlock | |
Function 56 - G41/G42 Compensation | |
Function 58 - Multi XML ControlFunction | |
Function 59 - G41/G42 Modal Preset ” | |
Function 801 - Set Static IP Address | |
Function 821 - Set up Tool Tip Sensor | |
Function 822 - Setting up Tangential Knives |