CNC Tooling
Standard Vcarve settings used in the Fabrication Lab including The Edge CNC tool database
Router Tooling
Router Bits
End Mills
Small Compression
Large Compression
Straight Cut
Up Cut
Down Cut
Drill Bits
Drag Knife
- Fits in a 1/4in router collet (7mm)
- Enables you to cut thicker materials
- Maximum cutting depth: 1/4 in. (6.3mm)
- Minimum cut radius in materials thinner than 1/8 in. (3.1 mm): 1/8 .in (3.1mm)
- Minimum cut radius in materials over 1/8 in. (3.1mm) thick: equals material thickness
- Offset 4mm
Creaser
Creasing Attachment
Fits on all Donek Tools Drag Knives (D2 or D4 recommended) Can be used to Crease cardboard and foam Can be used with a 28mm Olfa (TM) or Fiskars (TM) rotary cutting wheel Tool Offset (20.3mm)
