Slim Chair

anonymous@undisclosed.example.com (Anonymous) — Fri, 28 Feb 2020 16:52:11 +0000

Slim Chair

Design Files

The Design files and assembly instructions are release under a CC2-BY license.

Cut Files

These Vcarve cut files are contain two layouts.

SlimChairx1.crv is a single chair.
SlimChairx4_2400x1200.crv is four chairs nested on a single sheet of 18mm formply.

Open Desk

anonymous@undisclosed.example.com (Anonymous) — Thu, 27 Feb 2020 12:52:54 +0000

Open Desk

OpenDesk.cc used to provides open source furniture. In 2017 opendesk has started restricting access to their design files so that they are only given out by request.

The following files are released under CC0 - CC=BY

Free/Libre Designs

Name	License	Design Files
–	-	-
[Lean Desk](https://www.opendesk.cc/lean/desk)	CC-BY	[v1.5.0](https://github.com/timrolls/Opendesk/tree/master/lean-desk-v1.5.0)
[Divide](https://www.opendesk.cc/divide/divide)	CC-BY	[v1.0.2](https://github.com/timrolls/Opendesk/tree/master/divide-v1.0.2)
[Hot Desk](https://www.opendesk.cc/utility/hot-desk)	CC-BY	[v1.1.1](https://github.com/timrolls/Opendesk/tree/master/hot-desk-v1.1.1)
[Unit Table](https://www.opendesk.cc/unit/unit-table)	CC-BY	[v3.0.0](https://github.com/timrolls/Opendesk/tree/master/unit-table-v3.0.0)
[Team Desk](https://www.opendesk.cc/lean/team-desk)	CC-BY	[v1.0.1](https://github.com/timrolls/Opendesk/tree/master/team-desk-v1.0.1)
[Lift Standing Desk](https://www.opendesk.cc/lean/lift-standing-desk)	CC-BY	[v2.2.0](https://github.com/timrolls/Opendesk/tree/master/lift-standing-desk-v2.2.0)
[Fin Lockers](https://www.opendesk.cc/fin/fin-lockers)	CC-BY	[v3.0.2](https://github.com/timrolls/Opendesk/tree/master/fin-lockers-v3.0.2)
[Fin Bookshelf](https://www.opendesk.cc/fin/fin-bookshelf)	CC-BY	[v3.1.1](https://github.com/timrolls/Opendesk/tree/master/fin-bookshelf-v3.1.1)
[Fin Locker Planter](https://www.opendesk.cc/fin/fin-locker-planter)	CC-BY	[v1.3.0](https://github.com/timrolls/Opendesk/tree/master/fin-locker-planter-v1.3.0)
[Fin Bookshelf Planter](https://www.opendesk.cc/fin/fin-bookshelf-planter)	CC-BY	[v1.1.0](https://github.com/timrolls/Opendesk/tree/master/fin-bookshelf-planter-v1.1.0)
[Layout Table](https://www.opendesk.cc/tetrad/layout-table)	CC-BY	[v2.0.0](https://github.com/timrolls/Opendesk/tree/master/layout-table-v2.0.0)
[Breakout Table](https://www.opendesk.cc/lean/breakout-table)	CC-BY	[v2.1.1](https://github.com/timrolls/Opendesk/tree/master/breakout-table-v2.1.1)
[Pedestal](https://www.opendesk.cc/zero/pedestal)	CC0	[v3.1.0](https://github.com/timrolls/Opendesk/tree/master/pedestal-v3.1.0)
[Wiki Booth](https://www.opendesk.cc/zero/wiki-booth)	CC0	[v3.2.0](https://github.com/timrolls/Opendesk/tree/master/wiki-booth-v3.2.0)
[Slim Chair](https://www.opendesk.cc/regaliz/slim-chair)	CC-BY	[v3.0.0](https://github.com/timrolls/Opendesk/tree/master/slim-chair-v3.0.0)

SLQ Wiki facilities:fablab:fittings-custom:opendesk

Slim Chair

Slim Chair

Design Files

Cut Files

Open Desk

Open Desk

Free/Libre Designs