SLQ Wiki engagement:one_last_apocalypse:dbcyp

Craft activities - DBCYP at the shopping centre

anonymous@undisclosed.example.com (Anonymous) — Sun, 17 Jun 2018 00:03:04 +0000

Craft activities - DBCYP at the shopping centre

Apocalypse exploration (Sep 18th-22nd 2017)

(This is where you type the aim of the activities)

Materials needed

Preparation

Recommendations

Further learning

Introduction

(This is where you type the plan for each of the session)

Discussion

(This is where you type how you will facilitate the conversation about the activity)

End

(This is where you type how the session ends)

Reflections for each day

Evaluation Deception Bay

Other

(This is where you type any additional thoughts or personalized feedback)

Photos

(add photos and video links on vimeo)

DBCYP Design session

anonymous@undisclosed.example.com (Anonymous) — Sun, 17 Jun 2018 00:03:04 +0000

DBCYP Design session

The aim of this session (and the second one the following week) is to develop an understanding of design in Adobe Illustrator. It is hoped that the skills will then be applied to designing posters, signs and signage for events in Deception Bay.

Plan for the design workshop

Meet everyone at the side of The Edge to begin in the Fab Lab

Head to the DML

(Mick facilitating. Em assisting)

Go through the process of using illustrator

Set homework to research old style posters, identifying what style you like (colours) and identifying imagery for designing own poster next week (using laser)

Reflection

It was a great session. 14 people attended.

There were participants snap chatting The Edge as soon as they stepped into the building. Seeing how the laser works and getting inspired with the possibilities first up was great. No one (except Jen from dbcyp) had ever used Illustrator before. Everyone learnt new skills, asked questions and engaged during the whole session.

It was also great to see that the ones that I had met last week in dbay were still inspired about the OLA project and took photos of spyder board of the ideas that were coming up here.

Other

Photos

DBCYP Design session 2

anonymous@undisclosed.example.com (Anonymous) — Sun, 17 Jun 2018 00:03:04 +0000

DBCYP Design session 2

The aim of this session is to develop an understanding of design in Adobe Illustrator. It is hoped that the skills will then be applied to designing posters, signs and signage for events in Deception Bay.

Plan for the design workshop

In the Fab Lab:

1. Continue with design for laser cutter

2. Laser cutter induction

3. Cut designs

Reflection

There were 16 people that attended today's session. The group had done some prep work in that they had come with ideas of what they wanted to work on and towards cutting out. The objects they had chosen are for the mural for the shopping center activities next week. They designed birds, crabs, shells, buckets and kids playing in the sand using Illustrator.

It was great to see the group leave with the objects they had made. It all began to click for a number of the group today as well although there were a few that had given up on the process as they found last week's workshop in Illustrator very challenging and overwhelming.

After the session Mick and I chatted about seeing if a smaller group would like to come back in and work on the CNC router to see the possibilities of that as well. We also chatted about taking a design from today and cutting it on the CNC as well as a stand for it. This idea could then potentially feed into the larger OLA project happening out in Dbay as well.

Photos

Projected mural activity - DBCYP at the shopping centre

anonymous@undisclosed.example.com (Anonymous) — Sun, 17 Jun 2018 00:03:04 +0000

Projected mural activity - DBCYP at the shopping centre

Apocalypse exploration (Sep 18th-22nd 2017)

(This is where you type the aim of the activities)

Materials needed

Preparation

http://www.boredart.com/2015/11/clever-and-meaningful-collage-art-examples.html

https://www.ignant.com/2015/10/21/surreal-landscape-art-by-jati-putra-pratama/

Recommendations

Further learning

Introduction

(This is where you type the plan for each of the session)

Discussion

(This is where you type how you will facilitate the conversation about the activity)

End

(This is where you type how the session ends)

Reflections for each day

Evaluation Deception Bay

Other

(This is where you type any additional thoughts or personalized feedback)

Photos

3D Printing Inductions & Dioramas

anonymous@undisclosed.example.com (Anonymous) — Sun, 17 Jun 2018 00:03:04 +0000

3D Printing Inductions & Dioramas

Wednesday 25th 10-12pm. There will also be some library staff in attendance from Dbay to this session.

This session will focus on the induction process that takes place at The Edge as well as how to then incorporate dioramas.

DBCYP are doing it so that they can support the Deception Bay Library in rolling out this process as a part of their outreach and book club series.

The plan

1. Welcome in the foyer

2. Answer any questions about The Edge

3. Go to Fab Lab (get anyone that hasn't already to sign up as a new user)

4. Do inductions and look at the steps needed to make a diorama.

http://wiki.edgeqld.org.au/doku.php?id=facilities:fablab:inductions:3dprinter:start

Production notes

Have induction booklets photocopied and ready

Check that all the 3D printers are working

Have pizza boxes ready (already laser cut with diorama design)

Paper templates pre cut for the back drop and floor of the diorama as well as the proscenium archway

Reflection

This session had 5 people in attendance. All learnt how to design in tinker cad and export those designs to print them on the 3D printer. The librarian present learnt new and easier ways to use tinkercad that she can directly apply when doing it at the Deception Bay library.

The participants from DBCYP learnt skills from scratch and took a diorama home so as to practice and get it ready for the workshop coming up in Deception Bay.

Photos

The Quiet Year Games night at Deception Bay

anonymous@undisclosed.example.com (Anonymous) — Sun, 17 Jun 2018 00:03:04 +0000

The Quiet Year Games night at Deception Bay

Materials needed

Projector & Computer (or app on phone) to display powerpoint instructions

PowerPoint of the games rules to refer to when needed.

Facilitators notes to help with explaining

Contempt tokens (laser cut)

Coloured pencils/pens

Plain piece of paper for map

Paper for writing the Abundance & Scarcity

10 dice per table

Quiet year cards

Music for atmosphere

Preparation

Playing the game at the library beforehand.

DBCYP

anonymous@undisclosed.example.com (Anonymous) — Sun, 17 Jun 2018 00:03:23 +0000

DBCYP

Event experience

anonymous@undisclosed.example.com (Anonymous) — Sun, 17 Jun 2018 00:03:04 +0000

Event experience

Each section of the One Last Apocalypse program is a mini event- Each book club has an install and pack down. Each games night will as well.

An engagement that is emerging is engaging with groups that do event management training. These groups need to find work experience opportunities for their clients.

We have one such group, DBCYP, who are actively helping their clients who are low socio young parents re-entering the workforce. The organisation will help clients come to The Edge from Deception Bay to gain volunteer experience for their CV. Individuals will help with the install of events that are happening as part of the One Last Apocalypse. Clients will also get a tour of all the event spaces at The Edge, SLQ and SLQ.

The Edge is also conducting tours of the event spaces at The Edge and SLQ for DBCYP

SLQ Wiki engagement:one_last_apocalypse:dbcyp

Craft activities - DBCYP at the shopping centre

Craft activities - DBCYP at the shopping centre

Apocalypse exploration (Sep 18th-22nd 2017)

Materials needed

Preparation

Recommendations

Further learning

Introduction

Discussion

Share

End

Reflections for each day

Evaluation Deception Bay

Other

Photos

DBCYP Design session

DBCYP Design session

Plan for the design workshop

Reflection

Other

Photos

DBCYP Design session 2

DBCYP Design session 2

Plan for the design workshop

Reflection

Photos

Projected mural activity - DBCYP at the shopping centre

Projected mural activity - DBCYP at the shopping centre

Apocalypse exploration (Sep 18th-22nd 2017)

Materials needed

Preparation

Recommendations

Further learning

Introduction

Discussion

Share

End

Reflections for each day

Evaluation Deception Bay

Other

Photos

3D Printing Inductions & Dioramas

3D Printing Inductions & Dioramas

The plan

Production notes

Reflection

Photos

The Quiet Year Games night at Deception Bay

The Quiet Year Games night at Deception Bay

Materials needed

Preparation

DBCYP

DBCYP

Event experience

Event experience