Prototype Workshop Template

Prototype Workshop Template

Acknowledgement

We acknowledge Aboriginal and Torres Strait Islander peoples and their continuing connection to land and as custodians of stories for millennia. We respectfully acknowledge the land on which we all meet today, and pay our respects to elders past, present and emerging.

References

Digital Camera Control from PC (with arduino support): http://digicamcontrol.com/ Allows: multiple cameras, focus stacking, HDR through multiple images, etc. http://digicamcontrol.com/doc/usecases/multi

Similar project: https://www.instructables.com/Multiple-Raspberry-PI-3D-Scanner/

Conception/Ideas

Structure:

  • Dome for head, with ring that can be lowered or added to (modularly) for full body.

Cameras:

  • Raspbery pi cameras.
  • GoPro have remote for older models that can do 50 cameras at once. fish eye, low image resolution, long focal length and low light quality levels may be issue.
  • DSLR: expense may be issue

Chandelier type base made of knauf extruded foam for lightweightness

workshops/prototypes/multi-camera-photogrammetry.txt · Last modified: 2023/06/01 20:49 by Michelle Brown
CC Attribution-Share Alike 4.0 International Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International

We acknowledge Aboriginal and Torres Strait Islander peoples and their continuing connection to land and as custodians of stories for millennia. We are inspired by this tradition in our work to share and preserve Queensland's memory for future generations.