Media Manager
Namespaces
Choose namespace
Media Files
Files in workshops:prototypes:2022-23delivery-lasercutcovers:snow_globes
- 3d_gear.7z
- 2021/01/06 12:17
- 47.4 KB
- carousel_parts_corel.zip
- 2021/01/06 12:15
- 1013.8 KB
- carousel_parts_svg.zip
- 2021/01/06 12:16
- 24 KB
- img_0323_snow_globe_complete.jpg
- 4032×3024
- 2021/01/20 11:47
- 1.7 MB
- img_0323_snow_globe_complete_rotated.jpg
- 3024×4032
- 2021/01/20 11:49
- 2.2 MB
- magnet_base.jpg
- 364×372
- 2021/01/05 14:31
- 10.5 KB
- p1020033_start.jpg
- 4896×3672
- 2020/12/10 10:08
- 6.4 MB
- p1020034_bottom_off.jpg
- 4896×3672
- 2020/12/10 10:11
- 6.6 MB
- p1020034_bottom_off_cropped.jpg
- 2221×1684
- 2020/12/10 11:18
- 543.9 KB
- p1020035_inside.jpg
- 4896×3672
- 2020/12/10 10:13
- 6.3 MB
- p1020035_inside_cropped.jpg
- 2743×1648
- 2020/12/10 11:19
- 615.9 KB
- p1020037_guts_out.jpg
- 4896×3672
- 2020/12/10 10:15
- 6.4 MB
- p1020037_guts_out_cropped.jpg
- 2268×3062
- 2020/12/10 11:20
- 910.1 KB
- p1020038_mouse_wire_open_cropped.jpg
- 4710×2767
- 2020/12/10 11:52
- 1.6 MB
- p1020039_board_removed.jpg
- 4896×3672
- 2020/12/10 10:25
- 6.5 MB
- p1020039_board_removed_cropped.jpg
- 2495×2341
- 2020/12/10 11:21
- 807.3 KB
- p1020045_hack_complete.jpg
- 4896×3672
- 2020/12/10 12:11
- 6.7 MB
- p1020047_gears_open_cropped.jpg
- 2535×2083
- 2020/12/10 11:27
- 804 KB
- p1020049_gears_show_stop_2_cropped.jpg
- 2158×2311
- 2020/12/10 11:28
- 623.9 KB
- p1020049_gears_show_stop_2_cropped_arrow.jpg
- 2158×2309
- 2020/12/10 11:31
- 2.5 MB
- p1020050_gear_off_cropped.jpg
- 3068×3581
- 2020/12/10 11:32
- 1.3 MB
- p1020052_stop_off_cropped.jpg
- 2858×3185
- 2020/12/10 11:32
- 1 MB
- p1020054_switch_and_wires_cropped.jpg
- 1944×2272
- 2020/12/10 11:59
- 581.5 KB
- p1020056_gearbox_parts.jpg
- 4896×3672
- 2020/12/10 15:11
- 7.5 MB
- p1020057_driving_cog_and_screw_cropped.jpg
- 3005×3098
- 2020/12/10 14:00
- 1.2 MB
- p1020058_driving_cog_attached_cropped.jpg
- 2935×2971
- 2020/12/10 14:03
- 1.1 MB
- p1020059_servo_in_base.jpg
- 4412×3648
- 2020/12/10 14:09
- 1.9 MB
- p1020060_top_servo_in_base_cropped.jpg
- 4035×2529
- 2020/12/10 14:05
- 1.2 MB
- p1020060_top_servo_in_base_cropped_arrow.jpg
- 4032×2529
- 2020/12/10 14:13
- 3.3 MB
- p1020061_cutting_axles_1.jpg
- 4896×3672
- 2020/12/10 14:29
- 6.2 MB
- p1020062_cutting_axles_2.jpg
- 4896×3672
- 2020/12/10 14:29
- 6.6 MB
- p1020063_cutting_tube_1.jpg
- 4896×3672
- 2020/12/10 14:32
- 6.6 MB
- p1020064_all_shafts_cut.jpg
- 4896×3672
- 2020/12/10 14:33
- 6.6 MB
- p1020065_gearbox_assembled.jpg
- 4896×3672
- 2020/12/10 14:43
- 6.5 MB
- p1020066_axles_ready.jpg
- 4896×3672
- 2020/12/10 14:40
- 7.1 MB
- p1020067_axles_in.jpg
- 4896×3672
- 2020/12/10 14:40
- 6.7 MB
- p1020068_shafts_ready.jpg
- 4896×3672
- 2020/12/10 14:42
- 6.5 MB
- p1020069_gear_ready.jpg
- 4896×3672
- 2020/12/10 14:44
- 6.3 MB
- p1020070_gear_in.jpg
- 4896×3672
- 2020/12/10 14:45
- 6.4 MB
- p1020072_main_gear_ready.jpg
- 4896×3672
- 2020/12/10 14:46
- 6.2 MB
- p1020073_gears_assembled.jpg
- 4896×3672
- 2020/12/10 14:47
- 6.4 MB
- p1020074_gearbox_sides_on.jpg
- 4896×3672
- 2020/12/10 15:13
- 6.3 MB
- p1020075_gearbox_top_ready.jpg
- 4896×3672
- 2020/12/10 15:14
- 6.4 MB
- p1020076_gearbox_side_out.jpg
- 4896×3672
- 2020/12/10 15:15
- 6.8 MB
- p1020077_gearbox_with_screws.jpg
- 4896×3672
- 2020/12/10 15:17
- 6.4 MB
- p1020078_gearbox_finished.jpg
- 4896×3672
- 2020/12/10 15:18
- 6.5 MB
- p1020079_stand_and_drill.jpg
- 4896×3672
- 2021/01/05 15:40
- 6.7 MB
- p1020080_switch_hole.jpg
- 4896×3672
- 2021/01/05 15:41
- 5.4 MB
- p1020081_switch_located.jpg
- 4896×3672
- 2021/01/05 15:48
- 5.2 MB
- p1020082_swith_screwed.jpg
- 4896×3672
- 2021/01/05 15:49
- 6.2 MB
- p1020083_gearbox_with_platter.jpg
- 4896×3672
- 2020/12/10 15:50
- 6.4 MB
- p1020084_gearbox_with_magnets.jpg
- 4896×3672
- 2021/01/05 14:10
- 7.5 MB
- p1020085_magnets_attached.jpg
- 4896×3672
- 2021/01/05 14:11
- 7 MB
- p1020086_gearbox_with_tall_shaft.jpg
- 4896×3672
- 2020/12/10 15:54
- 6.7 MB
- p1020089_support_layout.jpg
- 4896×3672
- 2021/01/05 14:41
- 6.6 MB
- p1020090_support_verts_assembly.jpg
- 4896×3672
- 2021/01/05 14:42
- 6.8 MB
- p1020092_support_spreader_side_view.jpg
- 4896×3672
- 2021/01/05 14:43
- 7.2 MB
- p1020093_support_spreader_complete.jpg
- 4896×3672
- 2021/01/05 14:50
- 6.9 MB
- p1020094_support_on_floor.jpg
- 4896×3672
- 2021/01/05 14:50
- 7.2 MB
- p1020095_support_with_magnets.jpg
- 4896×3672
- 2021/01/05 14:56
- 6.6 MB
- p1020099_locating_floor_in_stand.jpg
- 4896×3672
- 2021/01/06 09:18
- 6.1 MB
- p1020100_circlip_start.jpg
- 4896×3672
- 2021/01/06 09:08
- 6.7 MB
- p1020101_circlip_cut.jpg
- 4896×3672
- 2021/01/06 09:08
- 6.5 MB
- p1020103_circlip_in_stand_bottom.jpg
- 4896×3672
- 2021/01/06 09:29
- 6.2 MB
- p1020104_circlip_with_gluegun.jpg
- 4896×3672
- 2021/01/06 09:30
- 6.2 MB
- p1020105_second_circlip_in.jpg
- 4896×3672
- 2021/01/06 09:33
- 6.9 MB
- p1020106_wire_notch.jpg
- 4896×3672
- 2021/01/05 15:55
- 6.5 MB
- sample_figures.zip
- 2021/01/06 12:27
- 87.5 KB
- shaft_base.jpg
- 295×310
- 2021/01/05 14:33
- 8.7 KB
- usb_wiring.png
- 698×372
- 2020/12/10 11:43
- 40.7 KB
File
- Date:
- 2020/12/10 14:13
- Filename:
- p1020060_top_servo_in_base_cropped_arrow.jpg
- Format:
- JPEG
- Size:
- 3MB
- Width:
- 4032
- Height:
- 2529
- Camera:
- Panasonic DMC-TZ80
- References for:
- Animatronic Snow Globes
![[root]](/doku.php?id=workshops:prototypes:diy_upcycled_everyday_carry_bag&ns=&tab_files=files&do=media&tab_details=view&image=workshops%3Aprototypes%3A2022-23delivery-lasercutcovers%3Asnow_globes%3Ap1020060_top_servo_in_base_cropped_arrow.jpg){kind=link}
