Manual Tip-Off

This Function is used for tool tip off if the tool is physically bigger the the touch disc mounted on the gantry or when planning the waste board.

  1. Change the tool using Tab 6 → Change → Select Tool eg 45mm Surface planer (Tool 10)
  2. Insert the 45mm Surface Planer and press ok.
  3. Move the spindle roughly 300mm x 300mm in from the home position
  4. Key in F24 to select Manual Tip-off
  5. Drive the head physically down to touch the wasteboard. use the +- button to cycle through the speed options (Fast, Medium, Slow, Step). Once touched the board press ok.

LINKS

CNC Router Operations

Other Operations - Staff Only

Multicam CNC Induction

facilities/fablab/equipment-cots/multicam_m-2412/manual_tip-off.txt · Last modified: 2018/07/23 14:27 by Michael Byrne
CC Attribution-Share Alike 4.0 International Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International

We acknowledge Aboriginal and Torres Strait Islander peoples and their continuing connection to land and as custodians of stories for millennia. We are inspired by this tradition in our work to share and preserve Queensland's memory for future generations.

© The State of Queensland (State Library of Queensland)