This device was found as a donation - but is missing several components … ( More detail to come )
Primary purpose will be to get it going / completed & it will need a few items to achieve this - Plan then is to build & tinker with what we have …
List the materials used, with dimensions, and quantities.
* itemise …
* TBA …
(List all the tools you used to complete the project, from #1 Philips screwdrivers, to the CNC machine)
(This is where you put the step-by-step photos showing how to carry out your project, as well as an explanation in words. Rename the steps as you like, use italics or bold for emphasis.
Don't forget to include design files for CNC, laser cutting or 3D printing but remember they need to be zipped before uploading to the Wiki (it is also useful if they are in a transferable format, .svg rather than .ai, for example)).
etc
(This is where you can put ideas that you tried, but which did not work (and why))
(Here you can put any suggestions from users that you have not yet implemented, and mention any unforeseen difficulties encountered in operation or construction)
This were you put external links like LED generator, if they have not appeared in the Instructions.
This is where you put files for laser cutting, Excel sheets of suppliers etc..
Any External Links like 'Thingiverse' etc. to go here …
- Basic check of parts available complete … Needs more work. ( List TBA ) - Printed out some of the missing bits … ( More to be Done ) - Provisionally ordered a replacement main board …
Itemize work carried out …
Project | Percent Complete | Project Lead | Status | Budget Req | Budget Approved | Next Major Milestone | Subsequent Milestones to complete | |
Bioloid_Robot | 40% | Andrew | $200 |