This page is a template for the commisioning of new equipment. To use, edit replace and remove any text that is in italics.
This proposal will have been approved by Daniel Flood, The Edge Lead. Paste the approved proposal in here.
Breakdown of what the machine can and cannot do.
All components with an accurate price list, itemised and linked to suppliers. For Example…
| Material | Quantity | Cost | Supplier |
|---|---|---|---|
| Arduino Nano v3 | 1 | $3.40 | |
| MAX7219-dot-matrix-module | 1 | $2.10 | |
| Lithium Ion Polymer Battery - 3.7v 500mAh | 1 | $5.70 | |
| Micro USB LiPo charger w/ Protection | 1 | $0.8 | |
| Short USB Cable - USB-A to Micro USB | 1 | $2 | |
| Jumper wire 75mm - female -female | 5 | $0.14 | |
| Total |
Timeframe for implementation, with defined end date. You can use the umlplantUML with the gantt syntax in for this
Or a simple table.
| date | task |
|---|---|
| March 3 | Prototype test |
Detail of required commitment from staff/and or volunteers.
Full OHS workup before anyone turns anything on.
Identify risks (both threats and opportunities); in terms of the cause of the risk, the uncertain event itself, and its impact were it to occur.
Risk mitigation strategy in place for the testing and building process.