LFA Case Version 1.0
Case Design
Components
-
Custom Foam insert
8 * 500mm power cables
8 Socket powerboard
8 * Lindy USB power chargers
Assembly
Grab the 500mm power leads and coil up until you have about 50mm of play at each end, then cable tie tight.
Slide the first PSU in the top slot
Flip the foam round and plug-in the first power-cable
Repeat for the remaining cables
Plug in all the cables to the powerboard
Wedge the powerboard into the bottom of the foam - make sure the powerboard lead is fed up through the hole.
Fit the foam in the case
Files
Current
Old