Standard Vcarve settings used in the Fabrication Lab including The Edge CNC tool database

• Fits in a 1/4in router collet (7mm)
• Enables you to cut thicker materials
• Maximum cutting depth: 1/4 in. (6.3mm)
• Minimum cut radius in materials thinner than 1/8 in. (3.1 mm): 1/8 .in (3.1mm)
• Minimum cut radius in materials over 1/8 in. (3.1mm) thick: equals material thickness
• Offset 4mm

Creasing Attachment

Fits on all Donek Tools Drag Knives (D2 or D4 recommended) Can be used to Crease cardboard and foam Can be used with a 28mm Olfa (TM) or Fiskars (TM) rotary cutting wheel Tool Offset (20.3mm)