====== Pixel Box V1 ======

===== Summary =====
Pixel Box is a short - 10-15 minute - community engagement workshop. It has an art focus, basic electronics and a number of possible extension activities. These activities will be listed later in this document as they are developed.

==== Materials ====

These materials are per participant if not specified otherwise.
  - 1 x CR2032 Battery
  - 2 x LED (random colours) 
  - Laser Cut Housing (see below)
  - Tracing Paper (70x70mm square)
  - Quick Grip Adhesive or Hot Glue Gun


 ==== Tools ====
None


 ===== Instructions =====

Rename the steps as you like, use //italics// or **bold** for emphasis

 ==== Step Zero: ====
Prep all material prior to workshop. Ensure sufficient materials for the number of participants.

 ==== Step One: ====
Assemble outer box.

 ==== Step Two: ====
Assemble inner box.

 ==== Step Three:  ====
Assemble LED and battery assembly

 ==== Step Four:  ====
Insert LED and Battery assembly into inner box

 ==== Step Five: ====
Wrap tracing paper over open face of inner box

 ==== Step Six: ====
Slide inner box into outer box, open face of inner box toward opening in outer box.


 ==== Activity Extensions ====

To be added


 ==== Files ====
This is the most recent file laid out. {{ :workshops:pixel_box_004_final.cdr |}}