====== Laser Hanging Frame =====

Michelle Brown, 2023

===== Acknowledgement =====
We acknowledge Aboriginal and Torres Strait Islander peoples and their continuing connection to land and as custodians of stories for millennia. We respectfully acknowledge the land on which we all meet today, and pay our respects to elders past, present and emerging. 

===== Summary =====

Create a wooden hanging frame for prints using laser cut, ply, magnets and rope.

{{ :workshops:prototypes:hangingframe.pdf |}}


====== Materials ======

====   ====

^ Material    ^ Quantity  ^ Cost   ^ Supplier          ^
| Material 1  | 1         | $0.00  | [[start|Supplier 1]]  |
| Material 2  | 1         | $0.00  | [[start|Supplier 2]]  |
| Material 3  | 1         | $0.00  | [[start|Supplier 2]]  |
| Material 4  | 0.1       | $0.00  | [[start|Supplier 3]]  |
|             | Total     | $0.00  |                   |

====   ====

====== Tools and Preparation ======

Again, if your workshop does not require physical tools, delete or change this to something like Software required. 
===== Tools =====

  * Tool 1
  * Tool 2
  * Tool 3
  * Tool 4

====   ====



====== References ======

  * [[.2022-23delivery-lasercutcovers:url|website]]
 

===== Downloads =====