====== QwiqCnrs - 3D printable box corners======
developed by Mick Byrne 2025

{{workshops:public:qwiqcnr.jpg?600}}

In 2025The Edge offered a Peppers Ghost workshop based on the hologram component of the [[workshops:prototypes:artofprojection&s|Art of Projection]] workshop. 

Instead of gluing up a boax 3d printable corners were designed paramentrically so that and thickness of card could be turned quickly into a box 

{{workshops:public:screenshot_2025-03-01_at_12.48.26 pm.png?600}}

The a STL design for the corners and a //DXF for a corner cutting template// can be downloaded after entering your card thickness into the parameters

{{workshops:public:screenshot_2025-03-01_at_3.55.37 pm.png?600}} 

===Files===
7mm 2Ply Corrogated Cardboard - {{workshops:public:7mm_3dpnt_corner.stl}}         {{workshops:public:7mm_cornercut_temp.stl}} 

4mm Single Ply Cardboard - {{workshops:public:4mm_corner_template.dxf}}      {{workshops:public:4mm_corner.stl}}    


1.3mm Presentation Cardboard -
{{workshops:public:1.3mm_card_corner_template_for_printable_corners.dxf}} 

{{workshops:public:1.3_mm_printable_corner.stl}}