=====Level 2 and 3 Inductions====== 
**Level 2 Independent Machinist 

\\ 

Level 3 Supervisor/ Facilitator Induction** 

==== ====

Individuals seeking to complete this level of induction need to demonstrated an advanced understanding of the tool/ plant. 
The Edge uses an Recognition of Prior Learning (RPL) style process demonstrate competency.  

==== Key Criteria ====

Individuals must demonstrate competency in
  
Training participants in the safe and correct use of the Tool/ Plant.
identify and preempt unsafe, improper or inefficient use of the tool /plant by participants.
training and supporting participants’ application of workflow up to and around the tool/ plant  
training  participants basic maintenance and care 
a working knowledge and be able to support participant application of stock control and administrative procedures connected to the use the tool 
basic troubleshooting on the tool/ plant
delivering competency based assessment and possess a capacity/ experience to support participants with a range of backgrounds and learning styles to demonstrate competency.         

==== Evidence of Competency ====

**Three forms of evidence of competency are required for each criteria. In this case the three forms of evidence will be**

1.	Assessor Observation Report during training simulation 

2.	Candidate written response to Safe Work Instructions and Induction Materials 

3.	Candidate notes on Level 1 Induction Paperwork and FLS Procedures.   

as well as any other evidence candidates wish to present ( CV examples of work etc)

Observations can be recorded on the below word doc. 

 {{ :facilities:fablab:inductions:l2_3assessorobs.docx |}}
 
Subsequent to the Assessor finding candidate competent, their details are recorded on O:drive