===== Modeling and Printing a Keyring =====


 ===== Specific Objectives/Learning Goals: =====

The intention of the 3D induction is to enable participants to become familiar with the practical use and basic theory behind the use of the UP 3d printer. 

 ==== Learning Outcome:====

  * Create 3d model in Tinkercad.
  * Become confident with terminology around the machine
  * Become familiar with the safety procedures in the workshop and with the use of the machine.
  * Successfully print the 3D model.

 ==== Prior Learning: ====

No prior learning required
.Experience with the use of tinkercad or other 3d modeling software is advantageous

 ==== Resources/Materials required ====

<todo>Secure a HOT WORK PERMIT</todo>

<todo>10 pens</todo> 

<todo>10 laptops</todo>

<todo>10 USB sticks with files for lesson</todo>

<todo>4 working UP 3d printers</todo>

<todo>TV + facilitators laptop</todo>

<todo>10 print outs of of the 3d printing induction paperwork</todo>

<todo>Sample prints.</todo>

<todo>Extra printed copies of the power-point for inductees to seek answers for their paperwork.</todo>

<todo>Kit to repair the 3d printers</todo>

<todo>Spare spools of UP! ABS filament</todo>

  *