====== Printer Shelving ======

This is an adaption of the milkcrate shelving design that has only one compartment and up to 5 shelves ((this limit is forced by the extrusion of the back in fusion360 - to expand you just need to increase the number of shelves in parameters and re-extrude)).  This is a parametric design made in autodesk Fusion360. 
 
 ==== ====

{{ facilities:fablab:fittings-custom:20161205singlecompartmentcnc_drawing_v2.pdf |}}

 ==== ====



The model has top, bottom, side, shelf, and dividers. Here is what is looks like in a 10 crates  by 10 crates size.



This is too big to be cut, but starting from an oversized model makes the parametric rescaling of sketches possible in Fusion360 (( not sure if this is intended, but re-dimensioning sketches breaks the rectangular pattern on the extruded faces.))