~~DISCUSSION~~


====== Multicam M-2412 ======

CNC Router is a computer controlled version of the handheld router. It is used for cutting and hollowing shapes in hard materials - timber, plastics, aluminum. The CNC (computer numeric controlled) allows this machine to cut precise, repeatable, quick and efficient copies of a design.

<WRAP center round box 60%> The Edge's M-2412 is manufactured locally in Brisbane by Multicam CNC and features:

  * A2MC Controller
  * ELTE COLLET ER32 - 3HP Spindle with max speed of 18000RPM
  * Multicam Oscillating Knife 
  * Vacuum Machine Bed
  * Multicam Vision System
  * 5 hp Dust Extractor
  * Donek Drag knife and creaser

</WRAP>

=====   =====

Other Upgrades Available

  * Tangential Knife
  * Pneumatic Tool Changer
  * Mist Sprayer

[[facilities:fablab:equipment-cots:multicam_m-2412:partsofthemachine|Parts of the machine]]

[[facilities:fablab:equipment-cots:multicam_m-2412:cnc_safety|CNC Safety]]

----

{{page>facilities:fablab:equipment-cots:multicam_m-2412:cnc_router_operations&link&firstseconly&readmore}}

----

{{page>facilities:fablab:equipment-cots:multicam_m-2412:design_to_cut_workflows&link&firstseconly&readmore}}

----

{{page>facilities:fablab:equipment-cots:multicam_m-2412:tooling&link&firstseconly&readmore}}

----


<WRAP center round box 60%> **LINKS**

[[facilities:fablab:equipment-cots:multicam_m-2412:cnc_router_operations|CNC Router Operations]]

[[facilities:fablab:equipment-cots:multicam_m-2412:other_operations_staff_only|Other Operations - Staff Only]]

[[http://wiki.edgeqld.org.au/doku.php?id=facilities:fablab:inductions:multicamcnc:start&s[]=induction#cnc_induction|Multicam CNC Induction]]

</WRAP>