====Bookable Resources - 3D Printer=====
Book and use a 3D Printer for free once you've successfully completed your induction.
Just Pay for your materials

The Edge's bookable 3D printers are

===Prusa i3 Mk3===

{{ :facilities:bookableflabresources:3dprinters.png?400|}}

**Printer type:** [[https://en.wikipedia.org/wiki/Fused_filament_fabrication|Fusion Deposition Modeling]]

**Build Envelope:** 120(W) x 120(H) x 120(D) mm

**Material:** ABS
 
**File Input:** SD card with gcode files, USB via Up Studio software
 

----
For more technical information, the materials that can be used on our machines visit:

[[facilities:fablab:equipment-cots:prusa_i3_mk3]]

For the older Up Mini2 see here:

[[facilities:fablab:equipment-cots:up_mini_2#up_mini_2|Up mini 2]] 

----

For up-to-date prices of materials in the Fab Lab Shop visit  

[[facilities:fablabshop| Fab Lab Shop]] 
 
<WRAP center round important 60%>
IF YOU COMPLETED YOUR INDUCTION BEFORE 10 MAY 2019 YOU WILL NEED TO UPDATE YOUR MEMBER RECORD BY CALLING US ON 3842 9449 DURING THE EDGE OPENING HOURS OR DROPPING INTO THE SPACE.

</WRAP>