~~REVEAL~~
======Asgard Stool======
The Asgard stool was created for initially for the 2017 Brisbane Makerfest where 30 participants built the stool in 45 minutes. The stools were pre-cut, a demo cutting was shown. The stools have been re-purposed to serve as the take-away for The Edge CNC inductions.
==== ====
{{ :facilities:fablab:fittings-custom:stool_unpainted.jpg?direct&600 |}}
{{ :facilities:fablab:fittings-custom:stool_painted.jpg?direct&600 |}}
==== Build Instructions ====
These instructions cover using the files provided to;
* make existing design at The Edge (In-house)
* modify the design to suite other materials or sizes (Custom)
* make the existing design using another facility (External)
===== In-House =====
==== Materials =====
* 1200 x 1200 x15mm sheet of ply Plywood (purchased from fabrication lab )
==== Tools and Equipment =====
* CNC Router
* [[facilities:fablab:software:vcarve:start|Vectrics Vcarve Pro]]
* Hand file (CNC Pit)
* Mallet (CNC Pit)
===== Instructions ======
==== Preparation ====
* Book some time of the [[http://sl-queensland-web.ungerboeck.com/book/book-a-cnc-machine/|CNC Router]] (if you need to do an induction you can find the latest announcements [[https://www.slq.qld.gov.au/whats-on/cnc-router-induction| here]])
* Download the latest {{ |Vcarve File}}
==== At The Edge ====
* Cut the stool with the settings in the Vcarve file.
* Clean the stool using hand file.
* Follow the assembly instructions. {{ :facilities:fablab:fittings-custom:asgard_stool_instructions_v1.png?direct&600 |}}
===== Custom =====
==== Tools and Equipment =====
* CNC Router
* [[facilities:fablab:software:vcarve:start|Vectrics Vcarve Pro]]
* Hand file (Machine Shop)
* Mallet (Machine Shop)
==== Preparation ====
* Download and install Fusion360
* Download the latest Fusion 360 {{:facilities:fablab:fittings-custom:asgard_stool_induction_15mmthick_v1.f3d | Induction Chair}}
*
The 3D model can be viewed, interacted with [[https://a360.co/2UNwiV45|here]].
==== ====
To customise the material thickness, dimensions and tolerances you can change the parameters of the original design in [[facilities:fablab:software:fusion360|Fusion360.]].
==== ====
===== Changing Parameters =====
Before playing with the parameters remember;
* that they can (and will) interact in strange ways.
* Undo early and often.
* adjusting material thickness can affect everything - after changing, close the paramater window to check the effect.
Open the model, then go to the parameters menu.
==== ====
The parameters you will can change are favourites at the the top of the list.
====Export DXFs====
Once you have made all the required changes, select the correct sketches to export as DXFs.
==== External ====
==== ====
The individual faces as DXFs are:
Layout for cutting - sheet dimension minimum 560mm x 320mm.
CNC Settings are:
Export for other formats:
=====Old Files=====
{{ :facilities:fablab:fittings-custom:stoolcv3.zip |}}
{{ :facilities:fablab:fittings-custom:asgard_stool_instructions.pdf |}}
{{ :facilities:fablab:fittings-custom:asgard_stool_instructions.zip |}}
{{ :facilities:fablab:fittings-custom:asgard_stool_brismakerfest_final_v0.f3d |}}
~~AUTHORS~~