====== Commissioning Template ======

//This page is a template for the commisioning of new equipment. To use, edit replace and remove any text that is in italics.//
===== Proposal =====

//This proposal will have been approved by Daniel Flood, The Edge Lead. Paste the approved proposal in here.//
===== Capabilities =====

//Breakdown of what the machine can and cannot do.//
===== Components =====

//All components with an accurate price list, itemised and linked to suppliers. For Example…//

^Material  ^Quantity  ^Cost  ^Supplier  |
|Arduino Nano v3  |1  |$3.40  |   |
|MAX7219-dot-matrix-module  |1  |$2.10  |   |
|Lithium Ion Polymer Battery - 3.7v 500mAh  |1  |$5.70  |   |
|Micro USB LiPo charger w/ Protection  |1  |$0.8  |   |
|Short USB Cable - USB-A to Micro USB  |1  |$2  |   |
|Jumper wire 75mm - female -female  |5  |$0.14  |   |
|   |Total  |   |   |

===== Timeframe =====

//Timeframe for implementation, with defined end date. You can use the [[https://www.dokuwiki.org/plugin:plantuml?s[]=uml|umlplantUML]] with the [[http://plantuml.com/gantt-diagram|gantt]] syntax in for this//

====   ====

//Or a simple table.//

^date  ^task  |
|March 3  |Prototype test  |

===== Personale Required =====

//Detail of required commitment from staff/and or volunteers. //
===== OHS =====

//Full OHS workup before anyone turns anything on. //
==== Risks ====

//Identify risks (both threats and opportunities); in terms of the cause of the risk, the uncertain event itself, and its impact were it to occur.//
==== Risk Mitigation Strategy ====

//Risk mitigation strategy in place for the testing and building process.//
====   ====

\\