======CNC Tooling======

Standard Vcarve settings used in the Fabrication Lab including The Edge CNC {{ :facilities:fablab:software:vcarve:edgetooling.zip | tool database}}


======Router Tooling=====

=====Router Bits=====
====End Mills====
===Small Compression===

===Large Compression===

===Straight Cut===

===Up Cut===

===Down Cut===




====Drill Bits====

=====Drag Knife====


  * Fits in a 1/4in router collet (7mm)
  * Enables you to cut thicker materials
  * Maximum cutting depth: 1/4 in. (6.3mm)
  * Minimum cut radius in materials thinner than 1/8 in. (3.1 mm): 1/8 .in (3.1mm)
  * Minimum cut radius in materials over 1/8 in. (3.1mm) thick: equals material thickness
  * Offset 4mm



===Creaser===

Creasing Attachment



Fits on all Donek Tools Drag Knives (D2 or D4 recommended)
Can be used to Crease cardboard and foam
Can be used with a 28mm Olfa (TM) or Fiskars (TM) rotary cutting wheel
Tool Offset  (20.3mm)