=====Preflight checks - getting the Machine ready to cut=====
  * Is there a hot work permit in place?
  * Is there room in the extraction bag for your saw dust?
  * Check the required tool is is in the machine and is secure?
  * Has the tool been qualified?
  * Has the machine been homed? 
  * Are the required Vacuum bed zones are turn on? 
  * Is the material secure on the bed?
  * Have you loaded the right cutting file ( Preview File on the A2MC console)?
**Check with the Fabrication Lab Supervisor before cutting**

    


<WRAP hideslide>
<WRAP center round box 60%>
**LINKS** 

[[facilities:fablab:equipment-cots:multicam_m-2412:cnc_router_operations|CNC Router Operations]]

[[facilities:fablab:equipment-cots:multicam_m-2412:other_operations_staff_only|Other Operations - Staff Only]]

[[http://wiki.edgeqld.org.au/doku.php?id=facilities:fablab:inductions:multicamcnc:start&s[]=induction#cnc_induction|Multicam CNC Induction]]

</WRAP>
</WRAP>