===== Main parts on CNC machine =====



  * Machine bed - with vacuum suction
  * Steel Gantry - X axis
  * Machine head - Y and Z axis
  * Spindle  - routing bits and collets spins at 16000rpm average
  * Controller panel - Manually control the gantry and load jobs
  * Inverter enclosure- DO NOT OPEN! High Voltage. Main on/off switch is located here.
  * Vacuum Pump manifold - four sections can be isolated to increase vacuum.
===== =====

{{ :facilities:fablab:equipment-cots:multicam_m-2412:multicamcnc_parts2.png?600 |}}
{{ :facilities:fablab:equipment-cots:multicam_m-2412:multicamcnc_parts1.png?600 |}}