=====Manual Tip-Off=====
This Function is used for tool tip off if the tool is physically bigger the the touch disc mounted on the gantry or when planning the waste board.  

  - Change the tool using Tab 6 -> Change -> Select Tool eg 45mm Surface planer (Tool 10)
  - Insert the 45mm Surface Planer and press ok.
  - Move the spindle roughly 300mm x 300mm in from the home position
  - Key in F24 to select Manual Tip-off
  - Drive the head physically down to touch the wasteboard. use the +- button to cycle through the speed options (Fast, Medium, Slow, Step). Once touched the board press ok.


----

<WRAP hideslide><WRAP center round box 60%>
**LINKS** 

[[facilities:fablab:equipment-cots:multicam_m-2412:cnc_router_operations|CNC Router Operations]]

[[facilities:fablab:equipment-cots:multicam_m-2412:other_operations_staff_only|Other Operations - Staff Only]]

[[http://wiki.edgeqld.org.au/doku.php?id=facilities:fablab:inductions:multicamcnc:start&s[]=induction#cnc_induction|Multicam CNC Induction]]



</WRAP>
</WRAP>