~~REVEAL~~

====== Daily Setup ======

==== Prepare Space ====

{{  :mobileupload:mick:20160922:20160922_103719.jpg?300  |20160922_103719.jpg}}

  * Sign out Pit Key
  * Establish Comms via walkie talkie (Channel 21)
  * Open Roller Door
  * Place bollards out for CNC work area
  * Check dust extractor bag /Empty if required

==== Prepare Space Continued====  

  * Turn on compressor
  * Ensure required PPE is available and that the space is tidy enough to commence work.
  * Remove MDF cover board from waste board.**(2 person lift recommended)**
  * Check the condition of waste board for high spots and lightly sand where necessary
  * Turn on the CAD Computer, digital signage, lights and fan where necessary
 

==== Setup Machine ====

  * If there is a cutting tool/bit on the machine - ensure it is secure.
  * Ensure Spindle is clear for warmup procedure.

  * Test Vacuum Bed Compressor
  * Test Dust Extractor

==== Setup Machine Continued====
   * Turn on CNC machine and wait for it so go through its start up procedure
  * Home the machine
  * select Warm up spindle and OK (5 Mins)
 


----