=====CNC Safety =====
Machine must only be used inducted users and under the direct supervision of a Fabrication Lab Supervisor or approved Workshop Facilitator.
==== ====
Eye Protection is provided and **Must** be worn whenever working in the CNC Pit.
Hearing Protection is provided and **Must** be worn whenever the Machine is cutting.
Gloves are provided for the manual handling material and or attaching/removing the tooling.
Pit roller door is to be open whenever machine is in operation
Pit Courtyard must be blocked off to the public before operation of machine.
Only **One** operator is inside the yellow safety line when machine is in operation.
No leaning on the machine when in operation.
==== ====
Failure to observe these safety Guidelines and the directions of a Fabrication Lab Supervisor may lead to suspension of booking privileges
==== ====
====== Safe Usage of the CNC Pit ======
* The Edge staff supervisor to be present **at all times**
* A Hot Work Permit must be in place **at all times**
* Machine be used by inducted participants only.
* No person other than the operator or other authorized persons should be in the working area
===== General Personal Safety =====
* Enclosed footwear must be worn at all times.
* No loose or dangling jewelery or ID cards
* Long hair or beards must be tied up
* Avoid loose fitting clothing
* Personal Protective Equipment (PPE) must be worn when operating, supervising or observing the router in operation.
* Manual handling of materials