===== CNC Pit Setup =====
OH&S dictates that the CNC Pit needs to remain tidy. For some time there will be weekly inductions ( 5 participants plus facilitator) and open lab access ( min 2 people) 

To achieve this we will have a specifc list of furniture and equipment stored there. Anything else needs to be removed be the machine is used. 

====Tools==== 

  * Battery drill and charger
  * Phillips head Driver bit 
  * Drill bits 
  * Screws and washers ( well labeled so bed is never punched with longer screws )
  * Mallet
  * Water spray
  * Chuck Wrench 1 
  * Chuck wrench 2
  * Tape measure 
  * Veneer calliper
  * Multi Cam Manual
  * Tooling/ collets
  * Tarp 

====Stationary==== 
  * Markers (sharpie)
  * Pencil 
  * Whiteboard markers
  * Biro 
  * Clipboards x 6  
  * Broom 
  

====Cleaning/Maintenance====
  * Spray and Wipe 
  * Supply of Chux
  * WD40
  * Steel Wool 
 
====PPE====
  * Gloves ( for changing tool and manual handling) x 6 pairs (C)
  * Eyes Protection **Clean** x 6 pairs (C)
  * Container Eyes Protection **Worn** (C)
  * Disposable Hearing protection(C)
  * Hearing protection (Muff type) (C) 
  * Dust masks disposable (C)  


====Furniture==== 
  * Whiteboard
  * 6x stools 
  * Bin ( no offcuts )
  * Computer bench 
  * Bookshelves 
 
====Signage====
 (even if these are printouts initially) 
  * Operator only inside line when machine is cutting
  * Line
  * Eye and hearing protection to be worn when machine is in operation
  * Cut settings 
  * Right tool for the job    
  
<WRAP center round box 60%>
   **(C)** A Stock of accountable consumables will be kept in the consumables store and will be stocktaked weekly.
   *See Stock Control for procedures around these items.    
</WRAP>