=====Light up The Edge Install =====

Nathen went away and designed the kaleidoscopes and the overall structure design for the final installation piece. 

Here is a little insight into his process via photo's

1. Concrete is setting for the base of the installation

{{engagement:the_great_and_grand_rumpus:the_great_and_grand_rumpus:light_installation:concrete_sdetting.jpg?600|}}

2. Preparing the wires

{{engagement:the_great_and_grand_rumpus:the_great_and_grand_rumpus:light_installation:preparingthewires.jpg?600|}}

3. Lighting patterns

{{engagement:the_great_and_grand_rumpus:the_great_and_grand_rumpus:light_installation:lightingpatterns.jpg?600|}}

4. Concrete for the base is out of it's mould and ready to go

{{engagement:the_great_and_grand_rumpus:the_great_and_grand_rumpus:light_installation:concrreteoutofmold.jpg?600|}}

5. The housing for the Kaleidoscope's was cut on the CNC router and has now had a trim

{{engagement:the_great_and_grand_rumpus:the_great_and_grand_rumpus:light_installation:kaleridoscope_houseing_trimmed.jpg?600|}}

6. Trim put together and looking good in black

{{engagement:the_great_and_grand_rumpus:the_great_and_grand_rumpus:light_installation:lookinggoodinblack.jpg?600|}}

7. First glue gun for the housing

{{engagement:the_great_and_grand_rumpus:the_great_and_grand_rumpus:light_installation:firstgluerun.jpg?600|}}

8. Soldiering on with soldering

{{engagement:the_great_and_grand_rumpus:the_great_and_grand_rumpus:light_installation:solderingon.jpg?600|}}

9. Tarzan grip and tape

{{engagement:the_great_and_grand_rumpus:the_great_and_grand_rumpus:light_installation:tarzangripandtape.jpg?600|}}